Iogear GBS301/GBS301/GBS301 Manual do Utilizador descarregar pdf (Página 14)

When using the Bluetooth serial adapter with a Bluetooth-enabled device (PC/PDA),

you must set the Bluetooth serial adapter in slave mode (Switch 4 = Off).

Plug in the Bluetooth serial adapter to your serial device. If your device has a male

RS232 interface, use the included null modem adapter.

Plug in the power cable to your Bluetooth serial adapter; the blue LED will start blinking

after approximately fifteen (15) seconds. Once the blue LED is blinking once every 2-

3 seconds, this indicates that the Bluetooth serial adapter is in discovery mode; in

other words, ready to accept a Bluetooth connection.

Set device mode

Plug in

Power ON

Basic Configuration

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 43 44

Sem comentários

Iogear GBS301/GBS301/GBS301 Manual do Utilizador Página 14