Iogear GBS301/GBS301/GBS301 Manual do Utilizador descarregar pdf (Página 20)

Note: If you have previously paired to the Bluetooth serial adapter(s), make sure to follow

the unpairing procedure on page 29 before attempting to connect to a new device.

Set one serial adapter to Master (switch 4 = ON), and the other to Slave (switch 4 = OFF)

Method 1 –

Auto-paring

Follow steps below

Set matching baud rates as needed

Power On both serial adapters and wait approximately fifteen (15) seconds

·Blue LED on slave adapter will slowly blink (once every 2-3 seconds)

·Blue LED on master adapter will rapidly blink

Wait approximately two (2) minutes for the serial adapters to automatically pair and connect

Set device mode

Set baud rate

Power ON

Pair and Connect

Basic Configuration

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Sem comentários

Iogear GBS301/GBS301/GBS301 Manual do Utilizador Página 20